- Login to post new content in the forum.
| Topic | Replies | Created | Last reply | |
|---|---|---|---|---|
|
Stepper Motor, DC Gear Motor or Servo - CONFUSED | 3 | 39 weeks 4 days ago by carlosedlemos |
39 weeks 3 days ago by carlosedlemos |
|
|
My DIY motorized dolly | 0 | 40 weeks 2 days ago by akphotograph |
n/a |
|
|
Mistake in software MX2 Dolly Engine Version 0.91 | 0 | 40 weeks 5 days ago by havanna |
n/a |
|
|
Stepper motors and drivers | 0 | 1 year 2 weeks ago by arnesole |
n/a |
|
|
Help connecting camera to a opto-isolator | 0 | 1 year 6 weeks ago by brunocoelho |
n/a |
|
|
Test: Stage Dolly Zero Dynamic Perception - Panogear | 0 | 1 year 8 weeks ago by paolomicai |
n/a |
|
|
X-Y stage for scanner | 0 | 1 year 11 weeks ago by pdesmidt |
n/a |
|
|
MX2 Dollyshield - Motor 0 will go one direction but not the other. Motor 1 will go both ways. Solder issue? | 1 | 1 year 15 weeks ago by jabbin |
1 year 15 weeks ago by shutterdrone |
|
|
MX2 Dollyshield calibration on DIY dolly | 4 | 1 year 27 weeks ago by Fraa |
1 year 16 weeks ago by Fraa |
|
|
DollyShield DIY and i have a problem with loading software on Arduino UNO. | 3 | 1 year 23 weeks ago by maxiu0 |
1 year 17 weeks ago by shutterdrone |
|
|
Telescoping Timelapse Crane | 2 | 1 year 18 weeks ago by disneytoy |
1 year 18 weeks ago by disneytoy |
|
|
Collapsible Dolly Design | 0 | 1 year 19 weeks ago by iblanken |
n/a |
|
|
Inexpensive Dolly Design | 15 | 1 year 42 weeks ago by chrisdube |
1 year 23 weeks ago by jaywar |
|
|
Jib how to move a Jib - motion control | 4 | 1 year 28 weeks ago by stopmotion |
1 year 27 weeks ago by shutterdrone |
|
|
Slider motorized 3-axis | 3 | 1 year 29 weeks ago by Hokusai Films |
1 year 29 weeks ago by Hokusai Films |
|
|
Dynamic Perception TimeLapse Dolly, MX2 Controller Tour Videos | 7 | 2 years 41 weeks ago by shutterdrone |
1 year 35 weeks ago by QFE24 |
|
|
Stepper Motors | 14 | 1 year 37 weeks ago by moptop |
1 year 37 weeks ago by shutterdrone |
|
|
Long and Fast | 1 | 1 year 39 weeks ago by chainey |
1 year 38 weeks ago by shutterdrone |
|
|
DIY Track and Dolly | 0 | 1 year 41 weeks ago by jefftolentino |
n/a |
|
|
Focus stacking with an OpenMoco based dolly | 2 | 1 year 41 weeks ago by cronix |
1 year 41 weeks ago by cronix |
|
|
OpenMoco based timelapse dolly - first prototype | 2 | 1 year 43 weeks ago by cronix |
1 year 42 weeks ago by cronix |
|
|
12V PCB connector | 1 | 2 years 6 weeks ago by michaelb01 |
2 years 6 weeks ago by shutterdrone |
|
|
SLA7026M - stepper driver | 1 | 2 years 6 weeks ago by michaelb01 |
2 years 6 weeks ago by shutterdrone |
|
|
Problem with motor velocity | 1 | 2 years 6 weeks ago by proty |
2 years 6 weeks ago by shutterdrone |
|
|
Picking out rail & motor, and moving the carriage assembly. | 0 | 2 years 7 weeks ago by Kaouthia |
n/a |
